Three possible ways to link multiple effects guitar amp.
Includes buy or build a parallel cable from the effects of all inputs into one output loop drives them all. This work and should not cause great difficulties if the output impedance of the amplifier low loop. Output 1k ohm or less should be able to drive the device as many effects that you would ever want. The second amplifier can be used from another Mix Output from BC 26s for stereo.
Many have the effect of mono inputs and outputs stereo.Dalam this, connect the left and right outputs of the Securities MONO IN 1 to channel 1 and 2 of each BC 26s. Play MIX / PAN control Channel 1 all the way to the left and to the MIX / PAN from Channel 2 all the way to the Right. This protects mixed effects’ stereo output and passes to the Left & Right Mix of BC 26s output. Continue with Channels 3 & 4 for the second effect and Channels 5 & 6 for the last effect. Continue with Channels 3 & 4 for the second effect and Channel 5 & 6 for the final effect. LEVEL channel partners to establish the same level intended to preserve the stereo effects mix.
