Welcome to AFIATA.COM Information of basic electronic circuits for repair and project
[ Content | Sidebar ]

Posts tagged Powersupply

Variable Power Supplies

Variable Power Supplies circuit using 2N3906, LM317, LM337, LM324, MJ2955, 7805, 2N3055, 2N3905 Parts: P1_500R P2_10K R1,R2_2K2 R3_330R R4_150R R5_1R C1_3300µF C2_1µF D1,D2_1N5402 D3_5mm Q1_BC182 Q2_BD139 Q3_BC212 Q4 _2N3055 T1_220V Primary, This Variable Power Supplies circuit has a current limit feature, in case there is a short circuit or other problem places. Here’s a circuit […]

Sansui 15″ CTV Model: CTVB2B15-P powersupply problem,TV not switching on,replaced C4460, issue stil persists?

Raj asked: Hi, I have a Sansui 15″ color TV Model: CTVB2B15-P. It automatically switched off. When checked, fuse was blown out, I tried replacing the fuse, but it again blown out, so suspecting the problem with SMPS, I further checked and found that C4460 transistor (or STR) was short and replaced it, and now […]

Schematic Diagram hp – MAX2338 Mixer IF SAW Filter Match at 183.6MHz for CDMA

The design and simulation of the impedance match between the MAX2338 mixer stage and a 183.6MHz SAW filter in a CDMA application. The SAW filter S-parameter is used to simulate the interface with the mixer. A worked example is provided with a SAWTEK 855893 SAW filter. An optimum impedance matching circuit between the MAX2338 mixer […]

Battery Charger circuit

Battery Charger circuit using 78L12, 555, MOC3041, 4060

Make High Power LED Flasher

Make High Power LED Flasher using PMV65XP, ZXM61N02F, 3906, 3904 circuit

LM555 Electronics Schematic Diagram Time Constant Control part 16

LM555 Electronics Schematic Diagram Time Constant Control part 16

hit counter script
Privacy Policy - Sitemap