Tutorial on Printed Circuit Board Design

Printed Circuit Board (PCB) is a component made of one or more layers of insulating material with electrical conductors and perfection in the work required if expecting good results.
Currently the main generic standards for the design of a printed circuit board, clean, neat, really tested the results.
Is a PCB board is single-sided, double sided or multilayer, this standard provides rules for manufacturability and quality as the requirements for material properties, criteria for surface plating, conductor thickness, component placement, dimensioning and tolerance rules.
The width of the circuit conductors must be selected based on the maximum temperature rise on the current and impedance values are received.
Tutorial on Printed Circuit Board Design

Tutorial on Printed Circuit Board Design
The distance between the PC trace is determined by the peak working voltage, coating and product applications. The minimum possible width of the traces and the distance between them is limited by your FABRICATOR manufacturing capabilities and in any case not be less than 2 mils and a minimum 6 / 6 mils. Depending on the application, other standards may also apply. For example, for audio, rf, vedio, power supplay and radio transmitters.Tutorial on Printed Circuit Board Design
PCB layout techniques requires a good understanding of the impact of the impedance and the signal from one circuit to another through parasitic capacitance and radio transmissions, as well as basic understanding of circuit operation. Tutorial on Printed Circuit Board Design
Here you will find some guidelines for designing the PCB and seek guidance directly in order to more easily understand. Tutorial on Printed Circuit Board Design