Welcome to AFIATA.COM Information of basic electronic circuits for repair and project
[ Content | Sidebar ]

Posts tagged MAX2338

Schematic diagram of the MAX2338 hp at the sound amplifier

The MAX2338 receiver RF front-end IC is designed for dual-band CDMA cellular phones and can also be used in dual-band TDMA, GSM, or EDGE cellular phones. Thanks to the MAX2338’s on-chip low-power LO divider, the cellular VCO module can be eliminated. The includes a low-noise amplifier (LNA) with an adjustable high-input third-order intercept point (IIP3) […]

Schematic Diagram hp – MAX2338 Mixer IF SAW Filter Match at 183.6MHz for CDMA

The design and simulation of the impedance match between the MAX2338 mixer stage and a 183.6MHz SAW filter in a CDMA application. The SAW filter S-parameter is used to simulate the interface with the mixer. A worked example is provided with a SAWTEK 855893 SAW filter. An optimum impedance matching circuit between the MAX2338 mixer […]

Battery Charger Circuit Diagram with Piezo Ttransducer

Battery Charger Circuit Diagram using LM393, 4011B, 7806, 1N4001, BD140

Make 2.45GHz RF Signal Detector

Make 2.45GHz RF Signal Detector This passive RF indicator is made from a few simple parts.  A 100uA moving coil meter is used to display the relative intensity of the RF signal.  This circuit can be used with some cellphones and many cordless telephones.

PC Serial Port Circuit

PC Serial Port Circuit PC serial port circuit to RS-232 pin out and cable

stereo headphone amplifier circuit

stereo headphone amplifier circuit stereo headphone amplifier circuit using KA1222 stereo headphone amplifier circuit stereo headphone amplifier circuit

Privacy Policy - Sitemap

Disclaimer

+1 demo: Basic page