Welcome to AFIATA.COM Information of basic electronic circuits for repair and project
[ Content | Sidebar ]

Posts tagged 4047

3000W Inverter

3000W Inverter Parts list: R1=10Mohms R2=100ohms R3=1.2Kohms R4=560Kohms R5-6=2.2Kohms R7-8=56 ohms 5W CX=22pF trimmed capacitor C1-2=22pF ceramic C3=8.2nF 100V MKT c4=10uF 16V C5=47uF 16V C6=470nF 400V D1=5V6 0.4W D2-3=47V 1W Q1-2=BS170 Q3-4=BD139 Q5-6=BD249 IC1=4060 IC2=4013 IC3=4047 CR1=3.2768 MHZ crystal T1=220Vac/2X10V 2X2.2A F1=5A Fuse F2=0.25A Fuse L1=1H smoothing choke 1. Advanced Energy Flow Management for lowest […]

1w Audio power amplifier schematics

1w Audio power amplifier schematics using AN7112 Mini audio power amplifier for portable radio provides access to AM and FM radio

lm555 lm555c timer

lm555 lm555c timer Circuits

Circuit Diagram and Filter 1.3-5W Power RF Amplifier Trans FM

A amplifier of force RF for the FM , is always essential for the amateur that wants it strengthens some small transmitter, that likely already it has manufactured or has been supplied ready. The present circuit can give 50-60W RF force of expense, with control smaller than 15-20W in the region of frequencies of FM, […]

Low impedance microphone amplifier is the best

The circuit is a microphone amplifier for use with low impedance (~200 ohm) microphones. It will work with stabilized voltages between 9-30VDC. If you don’t build the impedance adapter part with T1, you get a micamp for higher impedance microphones. In this case, you should directly connect the signal to C7.

Privacy Policy - Sitemap

Disclaimer

+1 demo: Basic page