Making Color Sensor Electronics circuit diagram
This circuit will sense eight colors that are: green, red and blue
(as primary colours): magenta, cyan and yellow
(as secondary colours): and black and white. It’s will be very useful for Electronics robotics.
The object whose colour is required to be detected should be placed in front of the system. The light rays reflected from the object will fall on the three convex lenses which are fixed in front of the three LDRs. The convex lenses are used to converge light rays. This helps to increase the sensitivity of LDRs. Blue, green and red glass plates (filters) are fixed in front of LDR1, LDR2 and LDR3 respectively. When reflected light rays from the object fall on the gadget, the colored filter glass plates determine which of the LDRs would get triggered. The circuit makes use of only ‘AND’ gates and ‘NOT’ gates. When a primary coloured light ray falls on the system, the glass plate corresponding to that primary color will allow that specific light to pass through.